Page 26 - SSCSurgicalStorageCabinets
P. 26

Carr Surgical Cabinets - Pass Through Cabinet InstallationManual No. 338 Revised 1/131. Cut wall opening and place cabinet:1. Check local codes. Seismic calculations available.2. 1/4" Mounting holes pro- vided. Mounting screws not supplied. Use screws suit- able for wall material. All other screws, nuts provided.3. Wall opening width is the front width of the cabinet(s), less 1 1/2".4. Wall opening height is cabi- net front height less 1 1/2".5. Wall opening depth is cabi- net side less 3/4"6. Cutwallopening.Framewith stud material. Make sure cabinet mounting holes allign with studs as shown. Check opening is square.7. Slide cabinet into wall. Do not lift by door handles.8. Install mounting screws into provided holes. Do not over torque and damage cabinet. Hand torque only.9. If multiple cabinet installa- tion, attach cabinet connec-tor. Slide additional cabinet(s) into wall and se- cure screws to cabinet con- nector and mounting holes.10.Check cabinet(s) are in- stalled square to insure proper door movement. Shim as needed.For multiple cabinet installation:Top viewCabinet connectorStudsFrontBackProvided 1/4" mounting holesNOTE! Do not open doors or remove corner braces untill cabinet is in wall!Side viewBack view (drywall removed for clarity)2. Secure cabinet to wall, attach flanges:. ...Q.. ..............Screw flanges to backSecure cabinet with installer supplied screwsBack.S. ..FrontSide viewBack view (dywall removed for clarity)Page 5338

   23   24   25   26   27