Page 4 - Specimen Pass Through SPT12
P. 4

Carr Specimen Pass-throughInstallation, Operation & Maintainance Manual No. 360 Revised 1/15Installation1. Checklocalcodesbeforebegin- ning installation.2. Cut wall opening to size: SPT12: 12 3/8" x 12 3/8". SPT24: 24 3/8" x 24 3/8. Frame opening at least on sides.3. Insertcabinetintoopening.Drill through provided mounting holes into wall studs. Insert ap- propriate mounting screws into holes and tighten.4. Remove paper backing from optional adjustable wall flange, exposing high strength adhe- sive. On the opposite side of wall, slide wall flange over the cabinet and firmly against wall.OperationThe cabinet maintains patient privacy by locking one door when the opposite door is open. To open door, push button and turn handle. If button will not push, the opposite door is open, wait for it to be closed and try again.MaintenanceThe cabinet is maintenance free. To clean, use a mild de- tergent with water and a clean cloth. Apply, then wipe off a light coat of mineral oil to make the stainless steel shine.Top viewOptional adjustable flange with self adhesive backingWall boardFixed flangeMounting screwsStudsWall board2"  Provided holes for mounting screwsFront viewSide view360 1 1 1 1 1 1 1 1 1 1 1 1 1 176543211 765432117654321 765432154321 5432154321 543211 1 1 1 1 1 1 1 1 1 1 1 1 1


































































































   1   2   3   4   5