Page 4 - SpecimenPassThroughSPT24
P. 4

Carr Specimen Pass-throughInstallation, Operation & Maintainance Manual No. 360 Revised 12/13Installation1. Checklocalcodesbeforebegin- ning installation.2. Cut wall opening to size: SPT12: 12 3/8" x 12 3/8". SPT24: 24 3/8" x 24 3/8. Frame opening at least on sides.3. Insertcabinetintoopening.Drill through provided mounting holes into wall studs. Insert ap- propriate mounting screws into holes and tighten.4. On the opposite side of wall, slide optional adjustable wall flange over the cabinet and against wall. Mark hole loca- tions on wall, remove the flange and drill holes. Replace wall flange and screw in place with appropriate screws.OperationThe cabinet maintains patient privacy by locking one door when the opposite door is open. To open door, push button and turn handle. If button will not push, the opposite door is open, wait for it to be closed and try again.MaintenanceThe cabinet is maintenance free. To clean, use a mild de- tergent with water and a clean cloth. Apply, then wipe off a light coat of mineral oil to make the stainless steel shine.Top viewOptional adjustable flange screwed to wallWall boardFixed flangeMounting screwsStudsWall board2" Provided holes for mounting screwsFront viewSide view360321321 32176543211 765432117654321 76543213211 1 1 1 1 1 1 1 1 1 1 1 1 154321 5432154321 5432121 21 21 211 1 1 1 1 1 1 1 1 1 1 1 1 121 121 1 1 21 1 1 21 1 1


































































































   1   2   3   4   5